Lenovo Yangtian v470 is a notebook computer under the Lenovo brand. The workmanship of this notebook computer is very excellent. The material used is aluminum-magnesium, which is the longest-used material on the market. Laptop products made of this material are very lightweight and have excellent durability. The Lenovo Yangtian v470 laptop is a product launched by the Lenovo brand in 2012. The product is positioned as a mid-range business notebook. Many users don't know much about the disassembly method of this laptop. So below, the editor will give users a detailed introduction to the disassembly method of Lenovo Yangtian v470.
Detailed explanation of the disassembly method of Lenovo Yangtian v470
1. The first step is to remove all the peripherals of the computer, such as mouse and keyboard, and network cables. To unplug, the power supply is cut off. Place the computer with the screen facing down.
2. At this time, you can see that there are two cross screw holes on both sides of the computer. This is where we use the cross screwdriver to completely unscrew the screws inside. Be sure to completely unscrew them, otherwise it will The machine may be damaged when unpacking
3. There is a snap buckle in the middle of the base of the all-in-one machine. When the screw is completely unscrewed, press the snap buckle hard. The lower part of the chassis will pop up slightly.
4. Then the lower part of the chassis will pop up slightly. Here we use the prepared hard card to insert into the pop-up gap and slide upward. Open it a little more, and then use both hands to open it hard, and you can take off the back cover
5. When you remove the back cover, you will see the optical drive screws and motherboard screws (you can see them here after removing them) See the memory) and hard drive screws.
6. Then you can start to deal with some problems with the laptop, and troubleshoot it for different problems.The corresponding components need to be inspected in more detail and then repaired in a targeted manner.
7. After solving the problem, install the back cover. When installing, be careful to fasten all the buckles before tightening the screws. Otherwise, the screws may be screwed on. , there will be gaps in the chassis, which is not beautiful.
The specific disassembly method of Lenovo Yangtian v470 laptop is what the editor introduced above. This disassembly method It is also the most commonly used disassembly method by many users on the market. It is relatively simple and easy to operate, and the tools used are relatively simple and common, and generally do not cause the above problems. The above editor has introduced the disassembly method of Lenovo Yangtian v470 here, hoping to bring some help to users.