Dell 1427 disassembly [step sharing]

Introduction: Dell's notebooks have a very good image in the memories of many consumers. On the one hand, it is because Dell's notebooks can show very good condition and service life during use; on the other hand, because Dell's notebooks are very attractive to consumers in terms of price and appearance design. However, in the process of using the notebook, some minor problems will inevitably occur, such as: the heat becomes more and more serious, and the notebook noise becomes louder and louder. These problems can be solved by oneself. Many people’s first reaction is to disassemble the machine. Although this method is good, there are many things to pay attention to during the actual operation.

(1) Disassemble the Dell 1427

1. Remove the casing

First turn the notebook over, then find the screws that fix the back cover, and then remove the Remove the screws one by one. After taking it off, don't rush to open the back cover. At this time, find the card slot of the wireless network card and gently push it to the right with your hand to remove the back cover of the notebook.

2. Disassembly of the internal configuration

After the back cover is opened, you can see the internal configuration of the notebook. At this time, you can first remove the screws fixing the fan, and then slowly remove the fan in an oblique direction to the right. Pay attention to the cable routing board during the process. After the fan is removed, the fan port and exhaust duct of the fan can be cleaned to a certain extent. Then you can loosen the device that fixes the motherboard, and then carefully remove the cable and motherboard together. Then you can clean the inside of the notebook to a certain extent. If you don't have special cleaning tools, it is recommended to blow directly with your mouth. Do not wipe it with anything with hair to avoid generating static electricity.

(2) Internal configuration of Dell 1427

Compared with ordinary notebooks, Dell's notebook has relatively strong performance. It uses an Intel Core dual-core processor internally, and the main frequency of the processor reaches 2GHZ, and the bus specification is also 800, which is It is relatively good among similar notebooks. Moreover, the hard drive capacity of this notebook is 250GB, and the memory capacity is also 2GB. During use, the maximum memory capacity of the notebook can reach 4GB, so this notebook can perform very well during use. state. Although the graphics card used is a mid-to-low-end independent graphics card, its video memory capacity is 512MB and the number of stream processors is 16, which is something that many notebooks cannot do.

 (3) Price of Dell 1427 notebook

Compared with Dell's previous notebooks, Dell's notebook belongs to It's a relatively expensive one. When it was launched on the market, it set the price at 5,450 yuan. Although the price of the notebook was affected to a certain extent during the subsequent sales process, its price has basically remained at around 4,999 yuan.

Conclusion: This Dell notebook not only has a very beautiful appearance, but its performance is also relatively high. Strong. Although some problems will inevitably occur during use, on the basis of mastering the disassembly steps, you can effectively reduce your own troubles and greatly improve the use value of the notebook.