Nowadays, laptops have made a great contribution to people. For example, at work, people use computers to For work, people facilitate transactions online; for entertainment, people use computers to watch videos and relax; in life, people use the Internet to browse information, learn about real-time hot spots, and so on. Therefore, in addition to knowing how to use a laptop, it is often not enough for us. We can also learn how to install the system. When our laptop freezes or cannot be turned on, etc., we can try to reinstall the system to repair the laptop. The following is an introduction to how to install the system on a nec laptop.
NEC notebook is equipped with a 2GHz P4-M notebook processor (integrated RADEON IGP 340M chipset), 15-inch TFT LCD display (1024*768 maximum resolution), 128MB RAM, 20GB hard drive and 24 speed optical drive. Its operating system is a Windows operating system: Windows XP Home Edition (Chinese version).
How to install XP system
The first step is to set up the optical boot: The so-called optical boot means that the computer first reads the optical drive when it starts. In this case, if the optical drive has optical boot The functional CD can be read out before the hard disk starts (such as when installing the system from the CD).
Setting method:
1. Start the computer and hold down the DEL key until the BIOS setting window appears (usually with a blue background and yellow English characters).
2. Select and enter the second item, "BIOS SETUP". Find the item or group containing the BOOT text inside, and find the three items "FIRST", "SECEND" and "THIRD" arranged in order, which represent "first startup", "second startup" and "third startup" respectively. Here we set it to "optical drive", "floppy drive" and "hard disk" in order. (If you do not see these three E-texts on this page, usually the option menu on the right side of BOOT is "SETUP", then press Enter to enter and you can see it) You should select "FIRST" and hit the Enter key. Select CD-ROM from the submenu. Press the Enter key again
3. After selecting the startup method, press the F10 key to exit.When the E text dialog box appears, press the "Y" key (can be omitted) and press Enter. The computer will automatically restart, proving that the changed settings have taken effect.
The second step is to install the XP system from the CD. Insert the XP installation CD before restarting. When you see the word CD appear at the bottom of the screen, press the Enter key. Only in this way can optical boot be achieved, otherwise the computer will start to read the hard disk, that is, it will skip optical boot and boot from the hard disk. After the XP system disk is booted, there will be an installation interface with a blue background. At this time, the system will automatically analyze the computer information without any operation until the monitor screen turns black for a moment, and then a Chinese interface with a blue background will appear.
At this time, the first thing that appears is the XP system agreement. Press the F8 key (meaning you agree to this agreement), and then you can see the information list of all partitions of the hard disk, and there are Chinese operating instructions. Select the C drive and press the D key to delete the partition (remember to back up the useful files on the C drive first). The location of the C drive becomes "unpartitioned", and then press C at the original C drive location (i.e. the "unpartitioned" location). The key creates a partition, and the partition size does not need to be adjusted. After that, the original C drive location changes to "New Unused", press Enter to continue.
Next, the format partition option page may appear. It is recommended to select "Format partition with FAT32 (fast)". Press Enter to continue. The system starts to format the C drive very quickly. After formatting, it analyzes the hard disk and the previous WINDOWS operating system, which is also very fast, followed by copying the files, which takes about 8 to 13 minutes (depending on the configuration of the machine). After the file copying is completed (100%), the system will automatically restart. When you see the CD-ROM again..., you do not need to press any keys to let the system boot from the hard disk, because part of the installation file has already been Copied to the hard drive (note: the disc cannot be removed at this time).
A color XP installation interface with a blue background appears, with an installation progress bar and remaining time display on the left. The starting value is 39 minutes, which is also determined according to the configuration of the machine. Usually, the installation of P4, 2.4 machines The time is about 15 to 20 minutes. At this point, until the installation is completed and the computer automatically restarts, there is nothing you need to do except entering the serial number and computer information (fill in whatever you want), and hitting Enter 2 to 3 times.any other operations. The system will automatically complete the installation.
The third step is to install the driver
1. After restarting, take out the CD, let the computer start from the hard disk, and enter the XP settings window.
2. Press "Next", "Skip", select "Do Not Register", and "Finish".
3. Enter the XP system desktop.
4. Right-click on the desktop, select "Properties", select the "Display" tab, click the "Customize Desktop" item, check "My Computer", and select "OK" to exit .
5. Return to the desktop, right-click "My Computer", select "Properties", select the "Hardware" tab, select "Device Manager", which is the management window for all hardware of the computer. This All options with a yellow question mark + exclamation mark in front of them represent hardware that does not have the driver installed. Double-click to open its properties, select "Reinstall Driver", insert the corresponding driver CD, select "Automatic Install", and the system will automatically identify the corresponding driver. Driver installation is complete. (AUDIO is the sound card, VGA is the graphics card, and SM is the motherboard. You need to install the motherboard driver first. If there is no SM item, it means there is no need to install it). Restart your computer after installing all drivers. The driver installation is now complete.
The above is a brief introduction to the installation system of NEC laptops. I hope it will be helpful to everyone when using laptops. In fact, the installation steps are quite multi-step, but if you follow the steps introduced step by step, you can successfully install the system. So I would like to suggest to everyone here that when we are installing, we must be patient and wait for the completion of each step before proceeding to the next step to ensure that each step can go smoothly and finally install the system for your laptop. .